Posts Tagged ‘Drone’


Back in November, I got a Phantom 3 Standard drone. The stock drone is a lot of fun, but it could use a couple upgrades. The first upgrade wanted was to replace the stock phone mount with a tablet mount. The larger screen on the table makes it easier to track objects. I got some really cool photos of an RC DC-3 flying around my drone at the local flying field, but following the small plane was difficult on the tablet, likely impossible on my phone.

The original phone mount is not very durable and after using it a few times, the plastic broke as you can see in the photo. DJI did send a replacement that was metal, but it would still limit me to my cell phone.

I found a tutorial on Phantom Help that used the DJI Inspire 1’s tablet mount. I initially decided to just screw the tablet mount into the plastic. I used some glue to add support. The upgrade was well worth it and it functioned well when out at the field flying.

However, within a week the mount broke. The plastic shell was fine, but the metal support broke. You can see the damage in the photo below. To be fair, this was after shipping my drone to my parent’s house for the holidays. While I packed the controller well, it appears some of the packing air bags broke in transit. I am still not quite sure how the plastic shell escaped damage (especially since it looks like the metal was crushed ).

Once I was home, I decided to order the metal insert. The threaded insert would allow me to remove the mount for shipping. To accommodate the new insert, I had to make the hole larger. I screwed the insert into the plastic and attached the nut. To make sure it stays secure, I used some hot glue. I also used hot glue to hold down wires that I had to reroute after the install.

The picture of the final install is below. I highly recommend this upgrade to anyone that got a DJI Phantom 3 Standard for the holidays! I also picked up a hard shell case for the drone and the accessories. For return shipping to Florida, I did remove the tablet mount and used the case. Both the controller and drone returned in perfect condition. I can’t wait to start flying again!

dsc_0136

One of the awesome projects at Maker Faire 2016 was creating a drone. Radio Shack had a free workshop using their DIY Drone Kits. Naturally I got a kit and quickly assembled it. However, my drone piloting skills are still developing and this quad has had more than a few rough landings. It wasn’t long before the original airframe needed to be replaced. A couple weeks of work later, I was successful and the replacement airframe can be found on Thingiverse! Follow me after the break and I’ll share all the details on my latest project! (more…)