Posts Tagged ‘Ham Radio’


This year I ventured up to Dayton Hamvention and had my sights set on getting a new radio. I was able to purchase a Connect Systems CS800D dual band FM/DMR radio. I naturally removed the cover to get a peak under the hood as seen in the photo above. Once I was done understanding the basic layout of the PCB (note the UHF PA mounted to the back of the case, top of the image, and VHF PA at the front of the case, bottom of the image). I found it interesting how they fit so much radio into such a tiny package.

After some bench testing, I decided it was time to figure out how to mount it in my car. With a remote control head, I can simply mount it with the same setup as my Yaesu 7900R control head (which has since been sold). One problem, the remote control head mounter supplied with the radio does not match the mounting plate I have in my car. To fix this, I need to create a new mounting plate (or at least an interface plate). I started up Autodesk Inventor. Follow me after the break for more details or check out the part on Thingiverse!

(more…)

Advertisements

This week I want to share a video of a presentation I made back in July on Digital Mobile Radio or DMR. DMR is a cool technology for commercial and amateur radio. It uses TDMA technology to enable two independent conversations on one frenquency at any given moment. Check out the video above for an overview of multiple digital voice options in amateur radio, as well as some in-depth discussion on DMR. Sorry the lighting on me is dim in the video. It was lowered to help the contrast for people attending live.

If you enjoyed this video, I will be hosting a live Introduction to Amateur Radio next week on Thursday! Stay tuned for more details and links to the live stream in a bonus blog post next week!

Test Setup

This past summer my brother and I ventured to the Bahamas for a short vacation. As amateur radio operators, we thought it might be fun to work from a different country. Several weeks before our trip, we received our reciprocal licenses from the Bahamas. Assigned the suffix “/C6A”, it was then time to figure out my rig.

Traveling with a radio is hard. Antennas for HF typically require lots of area, and people ask lots of questions.I wanted to have a small radio that I could operate from the beach. My brother brought his Elecraft KX2, but my Icom 706MKII would be too bulky. Follow me after the break to learn more about my solution.

(more…)

I was working on my Icom 706MKII a little while ago. I had gotten a new Heil mic for my rig earlier this summer and needed to tweak the ALC on the radio. When I was telling my brother, Tony (KD8RTT), about it, he asked me to make a video to help viewers of his channel. Check out the video above if you’re having mic issues with your Icom 706!

Panda APRSI know I have been bad at posting projects recently, but here is one I have done a few times now that is super easy to reproduce. With the super cheap embedded Linux platforms (Raspi, Beaglebone, etc.) and cheap TV dongles, it is really easy to make your own APRS iGate, just like the one in the photo above. This tutorial will give you the steps to get going with an APRS iGate. What is APRS you ask?

APRS stands for Automatic Packet Reporting System. It is a 1200 baud RF (mainly ham radio) packet system commonly used to record telemetry. Sometimes it is fun to log a trip or track a robot. APRS is a great tool for these sorts of problems. In the USA, APRS is commonly used on 144.39 MHz. It can be used between radios directly or can be used to log on the internet (via websites such as APRS.fi)  via an internet gateway or iGate.

To get started, follow me past the break.  (more…)

This past weekend was the 2013 ARRL Field Day. Field Day encourages amateur radio operators worldwide to get on the air using alternate power or different locations to test emergency preparedness. Both me and my brother Tony were on the air with our local clubs. The Gator Amateur Radio Club (GARC) teamed up with the Gainesville Amateur Radio Society (GARS) for Field Day here in Florida. Tony worked Field Day from Ohio. In addition to using the club radios and antennas, I also tested out my MagLoop and Icom 706MKII. I worked 2 contacts on digital with just 40 watts. Considering I was hoping to use it with QRP power levels (less than 10 watts), I was quite pleased to get 40 watts out of it. It could probably go higher, but I do not want to arch across my capacitor. Below are a few pics from our setup in Florida and of the loop in action. Enjoy!

Photo Credit: Sam K4ZVD

Photo Credit: Sam K4ZVD

The loop was easy to tune with the help of the MFJ antenna analyzer. I need to improve my ability to tune based on sound, although it is pretty to get it close. It was just outside the tent (you can kind of see some of the copper in the picture).

Photo Credit: Sam K4ZVD

Photo Credit: Sam K4ZVD

We were all impressed with the low noise and excellent performance of the loop antenna. It got quite a bit of attention from both club members and the general public.

Photo Credit: Sam K4ZVD

Photo Credit: Sam K4ZVD

The American and Gator flags flying high above our beam! Go Gators!

Photo Credit: Sam K4ZVD

Photo Credit: Sam K4ZVD

The members of the Gator Amateur Radio Club at Field Day: (from left to right) Ronnie, Andy, Jeff, and Sam (taking the picture).

The next few are from my phone. It took really nice pictures, even at night. (I have a Nokia Lumia 928.)

Gator Tower and LoopW4DFU Tower and my loop in the foreground.

WP_20130622_003

Florida State EDICS Trailer and Tower in the background.

Gator Tower at night

At night, the towers were up lit and looked really cool!