I have gotten a few questions regrading the “Set Speed” numbers in the RS485 LabVIEW VIs. To make life easy for everyone, I thought I would post them in one spot. Below are the numbers and the speeds they represent. Note: these are the same numbers used in the Enhanced Firmware for RS485 speed. These values do not work on the standard firmware as it is locked to 921600.
#define HS_BAUD_1200 0
#define HS_BAUD_2400 1
#define HS_BAUD_3600 2
#define HS_BAUD_4800 3
#define HS_BAUD_7200 4
#define HS_BAUD_9600 5
#define HS_BAUD_14400 6
#define HS_BAUD_19200 7
#define HS_BAUD_28800 8
#define HS_BAUD_38400 9
#define HS_BAUD_57600 10
#define HS_BAUD_76800 11
#define HS_BAUD_115200 12
#define HS_BAUD_230400 13
#define HS_BAUD_460800 14
#define HS_BAUD_921600 15
#define HS_BAUD_DEFAULT 15
Milluzzi Labs 