Milluzzi Labs

So unless you have been living under a rock, I am sure you have heard of the ‘smart sock’, Sensoria Fitness. Heapsylon, the company behind Sensoria, sent me a prototype of Sensoria Gaming. Sensoria Gaming seeks to leverage the smart fabric and enable it to do much more than track your workout. The sock is able to isolate the pressure over different areas of your foot, allowing for unique inputs. The sock is super accurate and this lends itself to many applications. You can generate pressure heat maps and watch how pressures changes with balance. Sensoria Gaming gives the tools to use this input in a new setting, both in software applications and physical products.

Remember that helicopter post from before? Now you know why it crashed. (Turns out I stink at flying those things!) Actually it was much easier once I finished the project. As you can see in the picture below, I took a servo motor and duct taped it to the controller. I used some LEGO parts to make an arm and control it with an Arduino. The Arduino is connected to my computer. I connected the sock to my computer and used some LabVIEW magic to make the sock talk to the arduino. I add in some filtering for signal stability and there you have it. A brief video of it working is below, as well as some ‘outtakes’ from flying…

Sensoria has a bit of time left on Indiegogo if you want to get in on it. This is not my only hack with the smart sock, so rest assured, more cool projects are coming.

My helicopter hack video:

Official pressure map video from Heapsylon: